Epson Stylus Pro 4910 Service Manual page 427

Epson Stylus Pro 4900/Epson Stylus Pro 4910
[Lubrication 7-1]
Part Name CR Unit
Lubrication Point On the shaft which is attached with SUPPORT ROD, SHAFT, CR
Lubricants (Part Code) Grease G-84 (1516265)
φ 2 x 8 mm x 4 points
Amount
φ 2 mm injector
Lubrication Tool
Waste cloth
Apply the specified amount with an injector. Using the waste cloth,
Lubrication Manner
spread the lubricant evenly around the shaft.
Note ---
Lubrication Points
MAINTENANCE
[Lubrication 7-2]
Part Name CR Unit
Lubrication Point Inside HOLDER, OIL PAD
Lubricants (Part Code) Oil O-17 (1521154)
Amount 0.09cc +- 10%
Lubrication Tool Container for Oil O-17
Detach HOLDER, OIL PAD.
Place the Oil Pad in the container and pour in the specified amount
Lubrication Manner
of oil. After one minute of soaking, take out the Oil Pad and attach
to HOLDR, OIL PAD.
Note ---
Lubrication
Revision A
(p181)
CR Unit
Lubrication Point
428
Confidential