Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.9.7 Home (Right) Side Cartridge Holder
1.
Discharge ink.
(p358)
2.
Remove the Front Cover.
(p142)
3.
Remove the Control Panel Cover.
4.
Remove the Right Upper Cover.
5.
Remove the Right Cover.
(p139)
6.
Remove the Left Cover.
(p137)
7.
Remove the Media Eject Cover.
8.
Remove the Right IC Cover Frame.
9.
Unlock the carriage, and move the CR Unit to the left end.
10. Disconnect the FFC and the two tubes from the Home (Right) Side Cartridge
Holder.
When connecting the tube, make sure to connect it correctly as
shown in the figure below.
11. Release the FFC from the three clamps and the tape.
DISASSEMBLY & ASSEMBLY
(p136)
(p138)
(p148)
(p140)
(p124)
Disassembly and Assembly Procedure
Home (Right) Side Cartridge Holder
FFC
Clamps
Clamp
Figure 3-174. Disconnecting the connector
Revision A
Tubes
Tape
239
Confidential