Releasing The Harnesses - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.6.4 Assist Roller Sensor/Retard Roller Sensor/
Pickup Unit Sensor
1. Remove the Front Cover. (p142)
2. Remove the Right Upper Cover.
3. Remove the Control Panel Cover.
4. Remove the Right Cover. (p139)
5. Remove the Mid-Right Cover. (p150)
6. Remove the SUB-B Board. (p162)
7. Release the harnesses from the five clamps.
8. Release the harnesses from the two saddles.
DISASSEMBLY & ASSEMBLY
(p138)
(p136)
Disassembly and Assembly Procedure
Clamp
Saddles
Clamps
Figure 3-127. Releasing the harnesses
Revision A
206
Confidential