Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.4 Carriage Mechanism
3.4.4.1 CR Motor
1.
Remove the Front Cover.
(p142)
2.
Remove the Right Upper Cover.
3.
Remove the Control Panel Cover.
4.
Remove the Right Cover.
(p139)
5.
Remove the Mid-Right Cover.
(p150)
6.
Unlock the CR Unit, and move the CR Unit to the left side.
7.
Disconnect the connector (CN204) of the CR Motor from the SUB-B Board.
8.
Release the harness from the saddle.
DISASSEMBLY & ASSEMBLY
(p138)
(p136)
(p124)
Disassembly and Assembly Procedure
Saddle
CR Motor
CN204
Figure 3-78. Releasing the harness
Revision A
168
Confidential