Epson Stylus Pro 4910 Service Manual page 274

Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.12.8 CR Motor
1. Remove the Color Measurement Device.
2. Remove the Mounter. (p132)
3. Remove the Upper Cover. (p257)
4. Remove the I/F Cover. (p258)
5. Remove the Right Cover. (p259)
6. Remove the Left Cover. (p260)
7. Open the Front Cover, and move the carriage to the right.
(Step 6 in "3.4.12.5 Paper Pressing Motor"
In the next step, make sure to confirm which screw is attached to
C H E C K
which location because various screws are used here.
P O I N T
8. Remove the eight screws that secure the Rear Cover.
A) Silver, Phillips, Round Washer Head S-tite M3x8: five pieces
B) Silver, Phillips, Bind P-tite M3x8: three pieces
9. Remove the Rear Cover.
DISASSEMBLY & ASSEMBLY
(p255)
(P. 269))
Disassembly and Assembly Procedure
Rear Cover
Figure 3-219. Removing the Rear Cover
Revision A
A
B
275
Confidential