Transportation; Preparation For Transportation; Moving/Transporting The Printer; Setting Up The Printer After Transportation - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

5.3 Transportation

Make sure to keep the ink cartridge installed so as to prevent
C A U T I O N
ink from leaking or the printhead from drying.
Do not touch any parts other than those must be repaired to
avoid any damage to the printer.

PREPARATION FOR TRANSPORTATION

1. Turn off the printer, and confirm that the printer is off. Then remove all the cables.
2. Remove the paper.
3. Remove the Auto Color Measurement Device.

MOVING/TRANSPORTING THE PRINTER

When you transport the printer, be sure to repack the printer using the original box and
packing materials.
When moving or transporting the printer, keep it flat. Do not tilt it
C A U T I O N
or turn it upside down to prevent ink from leaking.
MAINTENANCE

SETTING UP THE PRINTER AFTER TRANSPORTATION

1. Make sure that the installation site is proper.
2. Connect the power cord, and turn the printer on.
3. Perform a nozzle check.
Transportation
Revision A
413
Confidential