Entire Process Screen - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
6. Load an A4-sized paper vertically on the paper tray, click [Next] to start the nozzle
check.
7. Check the nozzle pattern. If there is any defect, execute the cleaning using the
Control Panel of the printer.
If the check pattern is appropriate, click [Next].
Make sure to confirm that there is no dot missing for all nozzles
C A U T I O N
before executing Colorimetric Calibration Adjustment.
8. Load an A4-sized Archival Matte Paper vertically on the paper tray, and click
[Next] to print the calibration chart.
Make sure to leave the adjustment chart for 5 minutes to dry it out.
C A U T I O N
Wait for the countdown to end.
ADJUSTMENT Head Related Checks and Adjustments
Figure 4-52. Entire Process Screen
Revision A
345
Confidential