Removing The Ink Selector Assy; Releasing The Ffc - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
12. Release the FFC from the three cable holders.
When fixing the FFC to the cable holder, be sure to set the upper
side of the FFC to the hook on the cable holder first, and then push
the lower side of the FFC to fix it.
Cable holder
Cable holders
Figure 3-162. Releasing the FFC
DISASSEMBLY & ASSEMBLY
Upper part
FFC
Lower part
FFC
Disassembly and Assembly Procedure
13. Remove the screw that secures the tube holder.
B) Silver, Phillips, Round Washer Head P-tite M3x8: one piece
14. Remove the Ink Selector Assy from the CR Unit taking care not to hit it against the
tube holder.
CR Unit
Figure 3-163. Removing the Ink Selector Assy
Revision A
Ink Selector Assy
Tube holder
B
230
Confidential