Removing The Motor Assy.,Pf - Epson LX-300 Service Manual

Disassembly and Assembly

3.2.4.1 Removing the MOTOR ASSY.,PF

Remove the printer mechanism (see Section 3.2.4).
1.
Remove the GROUNDING SPRING,PLATEN that secures the platen shaft. (see Section 3.2.43)
2.
3. Remove the CBB (M3 x
8) screw
4. Release the clip holding the MOTOR ASSY.,PF from the FRAME,RIGHT.
5. Remove the MOTOR ASSY.,PF from the FRAME,RIGHT.
Figure 3-9. Removing the MOTOR ASSY.,PF
3-1o
attaching the MOTOR ASSY.,PF to the FRAME,LIGHT.
FRAME, RIGHT TR~NSMISSloN
GEAR
/
MOTOR, ASSY.,PF