Colorimetric Calibration Id Startup Screen - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
ADJUSTMENT PROCEDURE
1. Turn the printer power on.
2. Start the Service Program, and select [Colorimetric Calibration Tool].
3. Click [Run] to start the "Colorimetric Calibration Tool".
4. Select the printer model.
When several drivers are installed for one printer, check that the
C A U T I O N
backlight of the LCD panel on the printer flashes by selecting the
printer model and click [Next].
5. Make sure that the "READY" message is displayed on the printer LCD, and click
[Next].
If the printer has not been used for more than two weeks, it is
C H E C K
P O I N T recommended to agitate the ink inside the cartridges to get an
accurate result. Remove all the ink cartridges from the printer, and
shake them gently for four or five times.
ADJUSTMENT Head Related Checks and Adjustments
Figure 4-51. Colorimetric Calibration ID Startup Screen
Revision A
344
Confidential