Trouble On Colorimetric Calibration Adjustment Program - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

2.12 Trouble on Colorimetric Calibration Adjustment program

This section describes possible trouble on Colorimetric Calibration Adjustment program and its causes, and their remedies.
Symptom
A message that says the program folder
may have abnormality is displayed.
A message which tells you to check the
SpectroProofer for any trouble is displayed
TROUBLE SHOOTING
Table 2-10. Trouble on Colorimetric Calibration Adjustment program
Cause
The program is not started correctly.
Files or configuration folders of the
program have abnormality.
The SpectroProofer has hardware
trouble.
Trouble on Colorimetric Calibration Adjustment program
Check Item
Did you start the program from a CD or USB memory?
Did you overwrite the configuration files of the tool?
Check if there are any hardware trouble, using the
diagnosis tool supplied by X-rite, Inc.
Tool: Diagnostics (Downloadable free)
Revision A
Remedy
Copy the program files on the computer first and
then start the program.
Refer to the diagnosis and the troubleshooting
supplied by X-rite, Inc.
Confidential
98