Epson Stylus Pro 4910 Service Manual page 175

Epson Stylus Pro 4900/Epson Stylus Pro 4910
17. Slide the driven pulley to the left to remove it from the driven pulley holder.
18. Remove the driven pulley from the CR Belt.
19. Move the CR Unit to the Home side.
Driven pulley holder
Driven pulley
Figure 3-86. Releasing the CR Belt (2)
DISASSEMBLY & ASSEMBLY
CR Belt
Disassembly and Assembly Procedure
When removing the CR Unit in the next step, be careful not to
C A U T I O N
disengage the slider.
20. Slide the CR Unit to the right to remove it.
Figure 3-87. Removing the CR Unit
Revision A
Slider
CR Unit
176
Confidential