Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.9.6 Head Cap
When removing the Head Cap, be careful not to touch the seal
C A U T I O N
material.
1.
Perform
"Wiper and Cap Cleaning & Exchange
the position to replace.
2.
Remove the Right Upper Cover.
3.
Remove the Wiper Cleaner.
(p237)
4.
Remove the Head Cap.
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing the Head Cap.
<Adjustment items>
1.
Wiper and Cap Cleaning & Exchange
2.
Counter Reset (Head Cap Counter)
DISASSEMBLY & ASSEMBLY
(p356)", and move the Wiper to
(p138)
(see p277)
and perform
Disassembly and Assembly Procedure
Seal material
Figure 3-173. Removing the Head Cap
Revision A
Head Cap
238
Confidential