Epson Stylus Pro 4900/Epson Stylus Pro 4910
12. Confirm that [ON] is displayed on the confirmation screen and click [OK].
[ON] is displayed: Go to
Step 14
[ON] is NOT displayed: Go to
13. Check the wiring of the Backing Sensor. If there is no abnormality on the wiring,
replace the Backing Sensor
(P.
272).
Return to
Step 7
to check again.
14. Click [Finish].
15. Turn the printer OFF and finish the adjustment.
Figure 4-110. [ON] Confirmation Screen
ADJUSTMENT
Step 13
TBD
SpectroProofer Related Adjustments
Revision A
402
Confidential