Right Holder Ffc; Removing The Right Holder Ffc; Disconnecting The Ffc - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.9.12 Right Holder FFC

1. Remove the Front Cover. (p142)
2. Remove the Control Panel Cover.
3. Remove the Right Upper Cover.
4. Remove the Right Cover. (p139)
5. Remove the Rear Cover. (p144)
6. Pull out the Board Tray. (Step 3
7. Disconnect the Right Holder FFC from the Home (Right) Side Cartridge Holder.
8. Release the Right Holder FFC from the clamp and the tape.
Right Holder FFC
Figure 3-188. Disconnecting the FFC
DISASSEMBLY & ASSEMBLY
(p136)
(p138)
to Step 5 in "3.4.2.13 Board Tray" (P.
Clamp
Tape
Disassembly and Assembly Procedure
9. Release the Right Holder FFC from the four clamps, and pull it out from the hole
of the main body frame.
10. Disconnect the Right Holder FFC (CN400) from the Main Board, and remove the
Right Holder FFC.
147))
Hole
Clamps
Figure 3-189. Removing the Right Holder FFC
Revision A
CN400
Right Holder FFC
252
Confidential