Epson Stylus Pro 4900/Epson Stylus Pro 4910
23. Release the Head FFC from the five clams, and pull it out from the hole of the
main frame.
24. Disconnect the Head FFC (CN100) from the Main Board.
Head FFC
Clamps
Figure 3-187. Removing the Head FFC
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Head FFC.
<Adjustment items>
1.
FFC Position Check
2.
Nozzle Check
3.
CR & PF Direction Head Slant Adjustment
DISASSEMBLY & ASSEMBLY
CN100
Hole
(see p277)
and perform
Disassembly and Assembly Procedure
Revision A
251
Confidential