Pf Encoder; Removing The Pf Encoder - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.5.2 PF Encoder

1. Remove the Front Cover. (p142)
2. Remove the Left Cover. (p137)
3. Disconnect the FFC from the PF Encoder.
When removing the PF Encoder in the next step, be careful not to
C A U T I O N
damage the PF Scale.
4. Remove the screw that secures the PF Encoder, and remove the PF Encoder.
A) Silver, Phillips, Bind P-tite M2.5x6: one piece
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustment after replacing or removing the PF Encoder.
<Adjustment item>
PF Encoder and Scale Check
DISASSEMBLY & ASSEMBLY
(see p277) and perform
Disassembly and Assembly Procedure
- Left side -
Figure 3-96. Removing the PF Encoder
Revision A
FFC
PF Encoder
A
Confidential
183