Epson Stylus Pro 4900/Epson Stylus Pro 4910
PAPER FEED MECHANISM
Start
See "3.4.2.8 Front Cover (p142)"
See "3.4.2.4 Left Cover (p137)"
See "3.4.2.5 Right Upper Cover
See "3.4.2.10 Rear Cover (p144)"
(p138)"
See "3.4.2.16 Mid-Right Cover/
See "3.4.2.3 Control Panel Cover
Mid-Left Cover (p150)" (L only)
(p136)"
See "3.4.2.6 Right Cover (p139)"
See "3.4.5.1 PF Motor (p182)"
(
左のみ
)
See "3.4.2.4 Left Cover (p137)"
See "3.4.4.6 APG Motor Assy
See "3.4.2.1 Printer Cover (p133)"
(p179)"
See "3.4.5.9 Paper Thickness
See "3.4.2.15 CR Cover (p149)"
Sensor1, 2 (p195)"
See "3.4.1.1 Unlocking the CR
Unit (p124)"
See "3.4.9.1 Ink Selector Assy
(p229)"
See "3.4.9.2 Printhead (p232)"
See "3.4.4.5 CR Unit/CR Belt
(p175)"
See "3.4.5.8 PW Sensor (p193)"
DISASSEMBLY & ASSEMBLY
See "3.4.5.3 PF Scale (p184)"
See "3.4.5.2 PF Encoder (p183)"
See "3.4.5.11 Release Sensor
See "3.4.5.10 Release Motor Assy
(p197)"
(p198)"
See "3.4.2.14 Media Eject Cover
(p148)"
See "3.4.2.10 Rear Cover (p144)"
See "3.4.5.5 Suction Fan (p186)"
See "3.4.2.11 Rear Unit (p145)"
See "3.4.5.7 2nd PE Sensor
See "3.4.5.6 PE Sensor (p188)"
(p192)"
Disassembly Flowchart
See "3.4.5.4 PF Belt (p185)"
See "3.4.9.3 IS Unit (p233)"
See "3.4.5.12 Edge Release Assy
See "3.4.5.13 Edge Sensor (p201)"
(p199)"
Revision A
118
Confidential