Epson Stylus Pro 4900/Epson Stylus Pro 4910
3.4.5.5 Suction Fan
1.
Remove the Front Cover.
(p142)
2.
Remove the Right Upper Cover.
3.
Remove the Control Panel Cover.
4.
Remove the Right Cover.
(p139)
5.
Remove the Left Cover.
(p137)
6.
Remove the Media Eject Cover.
7.
Remove the two screws that secure the Suction Fan.
A) Silver, Phillips, Round Washer Head S-tite M3x8: one piece
B) Silver, Phillips, Round Washer Head S-tite M3x6: one piece
8.
Disconnect the relay connector, and remove the Suction Fan.
DISASSEMBLY & ASSEMBLY
(p138)
(p136)
(p148)
Disassembly and Assembly Procedure
- On platen -
B
Suction Fan
Figure 3-99. Removing the Suction Fan
Revision A
Carriage unit
A
A
Relay connector
186
Confidential