Paper Cassette Sensor - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.6.7 Paper Cassette Sensor

1. Remove the Front Cover. (p142)
2. Remove the Right Upper Cover.
3. Remove the Control Panel Cover.
4. Remove the Right Cover. (p139)
5. Remove the Left Cover. (p137)
6. Remove the Media Eject Cover.
7. Remove the Left IC Cover Frame.
8. Remove the Full (Left) Side Cartridge Holder.
9. Remove the Power Supply Box.
10. Remove the lower cover. (Step 11
11. Release the harnesses from the five clamps and the saddle.
12. Pull out the harnesses from the hole of the frame.
13. Remove the three screws that secure the cassette rail.
A) Silver, Phillips, Bind P-tite M3x8: three pieces
14. Slide the cassette rail to the rear to remove it.
DISASSEMBLY & ASSEMBLY
(p138)
(p136)
(p148)
(p140)
(p242)
(p157)
in "3.4.6.6 Paper Empty Sensor" (P.
Disassembly and Assembly Procedure
Clamps
211))
Hole
Cassette rail
Clamps
Saddle
A A
Figure 3-141. Removing the cassette rail
Revision A
A
214
Confidential