Removing The Plate - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
9. Remove the two screws that secure the plate, and remove the plate from the
Suction Fan.
C) Silver, Phillips, Round Washer Head S-tite M3x8: two pieces
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustment after replacing the Suction Fan.
<Adjustment item>
Suction Check & Adjustment
Plate
B
Figure 3-100. Removing the plate
DISASSEMBLY & ASSEMBLY
(see p277) and perform
B
Suction Fan
Disassembly and Assembly Procedure
Revision A
187
Confidential