Epson Stylus Pro 4900/Epson Stylus Pro 4910
4.11.5 Auto Bi-D Adjustment
PAPER USED
Size: 16 inches
Type: Premium Glossy Photo Paper (250)
EXECUTION MODE
Normal Mode
PROCEDURE
1.
Turn the printer ON.
2.
Start the Service Program and select
3.
Click [Run].
The adjustment pattern will be printed.
4.
After the pattern was printed, the printer will automatically scan the pattern and
correct it (no need to adjust it manually).
5.
The result will be displayed on the screen.
OK!
is displayed: Normally adjusted. Go to
NG!!
is displayed: Error occurs.
Refer to Chapter 2 "Troubleshooting"
6.
Turn the printer OFF to complete the adjustment.
ADJUSTMENT
Auto Bi-D
Adjustment.
Step
6.
(P.
46).
Head Related Checks and Adjustments
Figure 4-49. Adjustment Pattern
Revision A
341
Confidential