Roll Lock Sensor; Releasing The Roll Paper Cover; Removing The Roll Paper Cover - Epson Stylus Pro 4910 Service Manual

Large format color inkjet printers
Hide thumbs Also See for Stylus Pro 4910:
Table of Contents

Advertisement

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.7.2 Roll Lock Sensor

1.
Remove the Right Roll Cover.
(p151)
2.
Remove the SUB-D Board.
(p164)
3.
Release the harnesses from the cable guides.
4.
Release the roll unit connection cable from the cable guide and the holder.
When installing the roll unit connection cable, be sure to attach the
cable tie to the position of the holder.
5.
Remove the inside cover.
Inside cover
Cable guides
Figure 3-145. Removing the roll paper cover
DISASSEMBLY & ASSEMBLY
Roll paper cover
Holder
Roll unit connection cable
Disassembly and Assembly Procedure
6.
Release and lift the roll paper cover.
Roll paper cover
Figure 3-146. Releasing the roll paper cover
7.
Remove the four screws that secure the "BASE,COVER,ROLL,RIGHT", and
remove the "BASE,COVER,ROLL,RIGHT".
A) Silver, Phillips, Bind P-tite M3x8: four pieces
"BASE,COVER,ROLL,RIGHT"
A
A
A
Figure 3-147. Removing the "BASE,COVER,ROLL,RIGHT"
Revision A
A
217
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 4900

Table of Contents