Figure 3-60. Removing The Network Board; Figure 3-59. Removing The Cooling Fan - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910
5. Remove the two screws that secure the Cooling Fan, and remove the Cooling Fan.
A) Silver, Phillips, Bind machine screw M3x14: two pieces
When installing the Cooling Fan, be careful of the installation
direction referring to
Cooling Fan

Figure 3-59. Removing the Cooling Fan

DISASSEMBLY & ASSEMBLY
Figure 3-59.
A
A
Disassembly and Assembly Procedure
6. Remove the five screws that secure the Network Board, and remove the Network
Board.
B) Silver, Phillips, Bind machine screw M3x6: five pieces
B
B
B

Figure 3-60. Removing the Network Board

Revision A
Network Board
B
B
156
Confidential