Epson Stylus Pro 4900 User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus Pro 4900
  6. User manual

Epson Stylus Pro 4900 User Manual

Automated colour accuracy
Hide thumbs Also See for Stylus Pro 4900:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Setup Manual
User's Guide
NPD4275-01 EN

Advertisement

Table of Contents
loading

Related Manuals for Epson Stylus Pro 4900

Summary of Contents for Epson Stylus Pro 4900

  • Page 1 User's Guide NPD4275-01 EN...

  • Page 2: Copyrights And Trademarks

    (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation’s operating and maintenance instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

  • Page 3: Table Of Contents

    Displaying Help......58 Using Epson Printer Utility 4....58 Starting Epson Printer Utility 4.
  • Page 4 Technical Support Web Site....165 Contacting Epson Support....165 Before Contacting Epson.
  • Page 5 Help for Users in Europe....166 Help for Users in Taiwan....166 Help for Users in Australia.

  • Page 6: Introduction

    Introduction Important Safety Instructions Read all of these instructions before using the printer. Also be sure to follow all warnings and instructions marked on the printer. When choosing a place for this product ❏ Place this product on a flat, stable surface that is larger than this product.

  • Page 7: When Handling The Ink Cartridges

    ❏ Always turn the product off using the Power button on the control panel. When this button is pressed, the Power light flashes briefly then goes off. Do not unplug the power cord or turn off the product until the Power light stops flashing. When handling the ink cartridges ❏...

  • Page 8: Printer Parts

    Printer Parts Front section Front cover Remove when replacing the built-in cutter or installing the optional SpectroProofer. Normally installed when using the printer. Cartridge cover (left) Open when replacing ink cartridges. U Paper cassette Load cut sheets from 8 to 17 inches wide. U Output tray Ejected paper is collected here.
  • Page 9 Paper eject support Support smooth ejection of the printed paper by raising the supports when printing on plain roll paper and when the optional SpectroProofer is installed. U Front manual feeder Feed paper into this slot when printing on cut sheets that are 0.8 mm thick or thicker. U Thick Paper”...
  • Page 10 Manually feed paper into this slot when printing cut sheets one at a time. U page 39 Paper support Raise this support when manually feeding paper to load the paper properly. Supports paper to prevent it from falling forward or backward. Edge guide Move left and right depending on the size of the paper that you want to load.

  • Page 11: Rear/Spindle

    Rear/Spindle Rear unit Remove if the paper jams, and then clear the jammed paper. Normally installed when using the printer. Roll paper holder unit connector Always use with the cable connected. USB interface connector Connects the USB cable. Airflow vents Vents the air used to cool the inside of the printer.
  • Page 12 : Connected. Flashing : Receiving data. AC inlet Connects the power cable. Movable flange (black) Fixes the roll paper placed on the spindle. Remove and install when loading or removing roll paper on the spindle. Spindle When you want to load roll paper into the printer, place the roll paper on the spindle. Attachment Install when placing roll paper with a three inch paper core on the spindle.

  • Page 13: Control Panel

    Control panel P light (Power light) The printer's operational status is indicated by a lit or flashing light. : The power is on. Flashing : Receiving data or performing processes such as turning off the power, head cleaning, auto nozzle check, or changing the type of black ink.

  • Page 14: Screen View

    r button (Menu button) ❏ If pressed in the ready status or when no paper is loaded, the Menu is displayed. U on page 99 ❏ If pressed while printing, the Printer Status menu from the Menu is displayed directly. U menu”...
  • Page 15 Tip: You can check the remaining ink level more reliably in Printer Status from the Menu, or from EPSON Status Monitor in the printer driver. We recommended checking the remaining ink level before printing a large job, and preparing a new cartridge for any ink cartridges that are running low.
  • Page 16 (flashing) Tip: You can check the remaining space more reliably in Printer Status from the Menu, or from EPSON Status Monitor in the printer driver. We recommended checking the remaining space before power cleaning and so on, and preparing a new Maintenance Box if it is nearing the end of its service life.

  • Page 17: Printer Features

    This printer is a wide-format ink jet color printer supporting 17 inch paper. The main features of this printer are described below. Realizing High Resolution By implementing Epson UltraChrome HDR Ink technology, we provide high-resolution printing to meet professional needs. Expansion of the color reproduction area providing a...

  • Page 18: Realizing High Productivity

    Our paper cassettes, which can be used even for glossy paper, can hold up to 250 sheets of plain paper (for paper 0.1 mm thick) or up to 100 sheets of Epson proofing paper. Introduction Also, up to 50 sheets of printed paper can be held in the output tray.

  • Page 19: Notes On Usage And Storage

    Freely placing print data made by various applications using Layout Manager This function allows you to place multiple print data made by different applications freely on one sheet to create posters and display articles. “Layout Manager(Windows only)” on page 89 Improved energy efficiency with sleep mode and Power Management When no print jobs are being handled, or when no...

  • Page 20: Notes When Not Using The Printer

    ❏ When using the printer, observe the operating temperature and humidity range described in the "Specifications Table". U “Specifications Table” on page 163 Even when the conditions above are met, you may not be able to print properly if the environmental conditions are not suitable for the paper.

  • Page 21: Notes On Handling Paper

    Check the manuals supplied with each paper. Notes on Handling ❏ Use Epson special media under normal room conditions (temperature: 15 to 25 ˚C; humidity: 40 to 60 %). ❏ Do not fold the paper or scratch the surface of the paper.
  • Page 22 Typically, print outs and photos fade over time (color distortion) due to the effects of light and various constituents in the air. This also applies to Epson special media. However, with the correct storage method, the degree of color distortion can be minimized.

  • Page 23: Introducing The Supplied Software

    Software Disc, such as using the plug-and-play function of the OS, Epson Network Utility is not installed. In such a case, install Epson Network Utility from the Software List. Install this when you need an input profile when performing color management.
  • Page 24 With this software, you can update the printer's firmware and make custom paper settings from your computer. “Using Epson Printer Utility 4” on page 58 With this software, you can configure various network settings for the printer from your computer. This is useful as it allows you to enter...

  • Page 25: Summary Of The Printer Driver

    Summary of the Printer Driver The main functions of the printer driver are described below. ❏ Converts print data received from applications into printable data and sends it to the printer. ❏ Allows the user to specify print settings such as the media type and paper size.

  • Page 26: Basic Operations

    See the following for more information on making settings. Also, when loading the Epson special media UltraSmooth Fine Art Paper, you need turn the Auto Roll Feeding setting to Off in advance. To turn the setting to Off, see U “Setting Auto Roll Paper Feeding”...

  • Page 27: Setting Auto Roll Paper Feeding

    Setting Auto Roll Paper Feeding The factory setting for Auto Roll Feeding is On. When using the Epson special media UltraSmooth Fine Art Paper, set Auto Roll Feeding to Off from the Menu before loading it in the printer. If UltraSmooth Fine Art...

  • Page 28: Removing And Installing The Spacer

    Removing the attachment (when using two inch paper cores) Remove the black flange and the attachment from the spindle. Remove the attachment from both flanges. Press the hooks (two points) out to release the hooks, and then pull the attachment out of the flange.
  • Page 29 Removing the spacer Remove the black flange from the spindle. Remove the spacer. Hold the outer edge of the spacer and pull it straight off. Placing roll paper on the spindle Follow the steps below to set roll paper on the spindle supplied with this printer.
  • Page 30 Hold with the gray flange (fixed) on the right, place both sides of the spindle into the spindle holder on the printer. Match the colors of the spindle holder to the colors on the end of the spindle. Note: If the spindle is set in the wrong direction, paper is not fed correctly.

  • Page 31: Cutting The Roll Paper

    Slide out the output tray to the second and third extensions. Do not raise the flap. If the flap is raised while printing, the paper may not be ejected correctly. Note: ❏ The output tray can only hold one sheet of roll paper at a time.

  • Page 32: Removing The Roll Paper

    Manual cut method If you set Off or Roll Paper / No Cut on the printer driver or control panel, you can cut the paper after printing using the following procedure. While watching the inside of the printer through the window in the printer cover, press the d button to feed the roll paper and adjust the cutting position to the of the printer on the right-hand side.
  • Page 33 Note: Always check that the roll paper is rewound before removing the spindle. If the roll paper is not rewound, the spindle may be locked. If you try to remove the spindle when it is locked, the printer could be damaged. Tip: When removing the roll paper, you can use the optional roll paper belt to prevent the roll paper...

  • Page 34: Loading Cut Sheets

    Loading Cut Sheets You can load cut sheets using the following three methods. Note: If the paper is wavy or curled, flatten the paper before loading it in the printer, or use new paper. If wavy or curled paper is loaded, this printer may not be able to recognize the paper size, feed the paper, or print correctly.

  • Page 35: Loading The Paper Cassette

    Tip: Some paper types cannot be printed from the paper cassette. U “Epson Special Media Table” on page 153 Use the front manual feed or rear manual feed method for these papers. Basic Operations Remove the output tray.
  • Page 36 When loading super A3 or larger paper, extend the paper cassette to match the size of the paper. When loading A3 or smaller paper, go to step 5 because the paper cassette does not need to be extended. Whether or not the paper cassette is extended, the procedure for loading paper after step 5 is the same.
  • Page 37 See the following for more information on the maximum number of sheets for Epson special media. “Cut sheet” on page 154 ❏ We recommend refilling the paper cassette once paper has completely run out, rather than adding on top of ones already in the cassette.
  • Page 38 For A4 Slide out the third extension of the output tray, raise the flap, and then push the section back in. For A3 Pull out the third section of the output tray, and then raise the flap. Basic Operations For super A3 or larger Slide out the second and third extensions of the output tray, and then raise the flap.

  • Page 39: Loading Manually From The Rear

    Check the paper source settings. Check the paper source icon on the screen, and if it differs from the paper that you want to load, change the setting. : Prints on roll paper and cuts automatically after printing each page. : Prints on roll paper but does not cut after printing.

  • Page 40: Loading And Ejecting Thick Paper

    Set the edge guide according to the width of the paper you want to load. Insert the paper into the rear manual feeder with the printable side face up as shown in the illustration. Insert the paper until it reaches the bottom. Check that the leading edge of the paper is inserted as far as the gray roller inside the printer.
  • Page 41 Check the paper source settings. Check the paper source icon on the screen, and if it differs from the paper that you want to load, change the setting. : Prints on roll paper and cuts automatically after printing each page. : Prints on roll paper but does not cut after printing.
  • Page 42 Insert the paper and align its edge with the guide line on the output tray. Feed the paper. When the paper is inserted, the screen display changes to Press the Y button. Check that the screen display has changed, and then press the Y button to automatically feed the paper to the start position.

  • Page 43: Basic Printing Methods(Windows)

    Basic Printing Methods (Windows) You can make print settings such as paper size and paper feed from the connected computer and then print. Turn on the printer, and load the paper. “Loading Cut Sheets” on page 34 “Loading Roll Paper” on page 27 When you have created the data, click Print from the File menu.

  • Page 44: Basic Printing Methods(Mac Os X)

    Screen while printing The following screen is displayed when you start printing, and the Progress Bar (the computer's processing status) is displayed. On this screen you can check the remaining ink level, product numbers for the ink cartridges, and so on. An error message is displayed if an error occurs or an ink cartridge needs replacing while printing.
  • Page 45 Tip: When using Mac OS X 10.4, or if items on the Page Setup screen are not displayed on the Print screen due to the application being used in Mac OS X 10.7, 10.6, or 10.5 follow the steps below to display the Page Setup screen.

  • Page 46: Printable Area

    Printable area This section describes the printable areas for the printer. If the margin set in an application is larger than the following setting values, sections beyond the specified margins are not printed. For example, if left and right margins are set to 15 mm in the Menu and an application attempts to print data to the full width, 15 mm strips on both sides are not printed.

  • Page 47: Changing The Type Of Black Ink

    See the following section to select a suitable black ink for the media type. “Epson Special Media Table” on page 153 Changing the type of ink on the printer It takes approximately 2 to 3 minutes to switch the black ink type (from ink replacement until ink charging is complete).
  • Page 48 Changing from the printer driver Normally, the required type of black ink is specified from the printer's Ink Menu. However, when printing on paper that is compatible with both types of black ink, you can perform the following procedure to automatically switch the type of black ink from the printer driver.

  • Page 49: Turning Off The Power Using Power Management

    Turning Off the Power Using Power Management This printer comes equipped with the following two types of power saving settings. You can save power by transitioning into sleep mode or use the Power Management function to automatically turn off the power when the printer has not been used for a certain period of time.

  • Page 50: Canceling Printing

    Canceling Printing There are a few ways to stop printing operations depending on the situation. When the computer has finished sending data to the printer, you cannot cancel the print job from the computer. Cancel on the printer. Canceling from the computer (Windows) When the Progress Bar is displayed Click Stop.

  • Page 51: Using The Printer Driver(Windows)

    Using the Printer Driver (Windows) Displaying the Settings Screen You can access the printer driver in the following ways: ❏ From Windows applications “Basic Printing Methods(Windows)” on page 43 ❏ From the Printer icon From the Printer icon Follow the steps below when specifying common settings among applications or performing printer maintenance, such as Nozzle Check or Head Cleaning.

  • Page 52: Displaying Help

    Displaying Help You can access the printer driver help in the following ways: ❏ Click Help ❏ Right-click on the item you want to check Click the Help Button to Display By displaying help, you can use the contents page or keyword search to read the help.

  • Page 53: Customizing The Printer Driver

    Customizing the Printer Driver You can save the settings or change the display items as you prefer. Saving various settings as your Select Settings You can save all of the setting items in the printer driver. Set each item for the Main screen and the Page Layout screen that you want to save as your Select Settings.

  • Page 54: Rearranging Display Items

    Enter any name in the Name box, and then click Save. You can save up to 100 settings. You can choose a setting you have registered from the Media Type list box. Tip: You can save the settings as a file by clicking Export. You can share the settings by clicking Import to import the saved file on another computer.

  • Page 55: Summary Of The Utility Tab

    Windows Taskbar. By right-clicking the icon, you can display the following menu and perform maintenance functions. EPSON Status Monitor 3 starts when the printer name is clicked from the displayed menu. Print Queue You can display the list of all waiting jobs.

  • Page 56: Uninstalling The Printer Driver

    EPSON LFP Remote Panel 2 You can update the printer's firmware and make custom paper settings. See the EPSON LFP Remote Panel 2 help for details. Tip: If EPSON LFP Remote Panel 2 and Printer Firmware Update are grayed out, EPSON LFP Remote Panel 2 is not installed.
  • Page 57 Utility tab and selecting the Epson Network Utility. However, if you are using other Epson printer(s), their printer driver(s) may also be using the Epson Network Utility. If you are using other Epson printer(s), do not remove Epson Network Utility.

  • Page 58: Using The Printer Driver(Mac Os X)

    Using the Printer Driver(Mac OS X) Using Epson Printer Utility You can perform maintenance tasks such as Nozzle Check or Head Cleaning by using Epson Printer Utility 4. This utility is installed automatically when you install the printer driver. Starting Epson Printer Utility 4...

  • Page 59: Uninstalling The Printer Driver

    Alignment)” on page 117 EPSON LFP Remote Panel 2 You can update the printer's firmware and make custom paper settings. See the EPSON LFP Remote Panel 2 help for details. Printer Firmware Update You can update the printer's firmware to the latest version.

  • Page 60: Removing Epson Lfp Remote Panel 2

    Select Uninstall, and then click Uninstall. Follow the on-screen instructions to continue. Removing EPSON LFP Remote Panel 2 Delete EPSON LFP Remote Panel 2 by deleting the EPSON LFP Remote Panel 2 folder. See the EPSON LFP Remote Panel 2 help for details.

  • Page 61: Printing Varieties

    Printing Varieties Auto Correct Color and Print Photos (PhotoEnhance) The printer driver for this printer comes with the Epson proprietary function PhotoEnhance that makes the most efficient use of the color reproduction area, corrects image data to improve colors before printing.

  • Page 62: Correct Color And Print

    ❏ Charts and Graphs Performs color correction to sharpen your images based on the sRGB space. ❏ EPSON Standard (sRGB) Optimizes the sRGB space and corrects the color. ❏ Adobe RGB Optimizes the Adobe RGB space and corrects the color.
  • Page 63 In other applications, set No Color Management. Example of Adobe Photoshop CS4 Open the Print screen. Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print. When the printer driver's Main screen is displayed, select the color correction mode.
  • Page 64 Display the Print screen. “Basic Printing Methods(Mac OS X)” on page 44 For Mac OS X 10.7, 10.6 and 10.5 select Color Matching from the list, and then click EPSON Color Controls. For Mac OS X 10.4, go to step 4. Printing Varieties...

  • Page 65: Printing Black And White Photos

    Make the necessary settings. See the printer driver help for more details on each item. Check other settings, and then start printing. Printing Varieties Printing Black and White Photos You can print black and white photos with rich gradation by adjusting the image data color by the printer driver.
  • Page 66 Select Color Management and then Document. Select Printer Manages Colors or No Color Management as the Color Handling setting, and then click Print. When the printer driver's Main screen is displayed, select Advanced B&W Photo as the Color. “Basic Printing Methods(Windows)” on page 43 Printing Varieties Select Custom as the Mode setting, and then...
  • Page 67 Color Management Settings Mac OS X Printer Manages Colors 10.7, 10.6 and 10.5 Mac OS X 10.4 No Color Management In other applications, set No Color Management. Example of Adobe Photoshop CS4 Open the Print screen. Select Color Management and then Document. Select Printer Manages Colors as the Color Handling setting, and then click Print.

  • Page 68: Borderless Printing

    Make the necessary settings. See the printer driver help for more details on each item. Check other settings, and then start printing. Printing Varieties Borderless printing You can print your data without margins on the paper. The types of borderless printing you can choose vary as shown below depending on the media type.

  • Page 69: Supported Media Sizes For Borderless Printing

    2 inch paper core. U “Removing and installing the spacer” on page 28 Depending on the media type, the print quality may decline or borderless printing cannot be selected. “Epson Special Media Table” on page 153 Roll paper sheet ✓...

  • Page 70: About Roll Paper Cutting

    About Roll Paper Cutting When performing borderless printing on roll paper, you can specify whether it is left and right borderless printing or all edges borderless printing, and how to cut the paper in the printer driver's Roll Paper Option. The cutting operation for each value is shown in the following chart.

  • Page 71: Setting Procedures For Printing

    Setting Procedures for Printing Making Settings in Windows When the printer driver's Main screen is displayed, you can configure various settings required for printing such as Media Type, Source, Page Size. “Basic Printing Methods(Windows)” on page 43 Select Borderless, and then click Expansion. Select Auto Expand or Retain Size as the Method of Enlargement.
  • Page 72 When using Mac OS X 10.4, or if items on the Page Setup screen are not displayed on the Print screen due to the application being used in Mac OS X 10.7, 10.6, or 10.5, display the Page Setup screen and make settings. If Auto Expand is selected, set how much of the image goes beyond the edge of the paper in the Expansion screen.

  • Page 73: Enlarged/Reduced Printing

    Enlarged/Reduced Printing You can enlarge or reduce the size of your data. There are three setting methods. ❏ Fit to Page printing Automatically enlarges or reduces the image size to fit the paper size. ❏ Fit to Roll Paper Width (Windows only) Automatically enlarges or reduces the image size to fit the roll paper width.

  • Page 74: Fit To Roll Paper Width(Windows Only)

    Select the size of the paper loaded in the printer from the Output Paper list. Fit to Page is selected as Reduce/Enlarge. Check other settings, and then start printing. Making Settings for Mac OS X Open the Print screen, select Paper Handling from the list, and then check Scale to fit paper size.

  • Page 75: Custom Scale Setting

    Select Reduce/Enlarge, and then click Fit to Roll Paper Width. Select the width of the roll paper loaded in the printer from the Roll Width list. Check other settings, and then start printing. Custom Scale Setting Making Settings in Windows When the printer driver's Page Layout screen is displayed, set the same paper size as the data's paper size in Page Size or Paper Size.

  • Page 76: Multi-Page Printing

    Set the scale in Scale. If Scale is not displayed on the Print screen, open the Page Setup screen, and then make the settings. You can now print as normal. Printing Varieties Multi-Page Printing You can print multiple pages of your document on one sheet of paper.
  • Page 77 Making Settings in Windows When the printer driver's Page Layout screen is displayed, select the Multi-Page check box, select N-up, and then click Settings. “Basic Printing Methods(Windows)” on page 43 In the Print Layout screen, specify the number of pages per sheet and the page order. If the Print page frames check box is selected, page frames are printed on each page.

  • Page 78: Manual Double-Sided Printing(Windows Only)

    Manual Double-Sided Printing (Windows only) You can easily print on both sides of the paper by printing out all even numbered pages and then flipping those pages over and reloading them manually to print the odd numbered pages. Cautions when Performing Double-Sided Printing When performing double-sided printing, note the following points.

  • Page 79: Poster Printing (Enlarge To Cover Several Sheets And Print - Windows Only)

    When the odd pages have finished printing and the on-screen guide appears, reload the paper as instructed, and then click Resume. Printing Varieties Poster Printing (Enlarge to cover several sheets and print - Windows only) The poster printing function automatically enlarges and divides the print data.

  • Page 80: Setting Procedures For Printing

    “Supported Media Sizes for Borderless Printing” on page 69 “Epson Special Media Table” on page 153 ❏ If Single Cut or Double Cut is selected as the Auto Cut setting, the length of the paper is shortened by 1 or 2 mm and the joins do not fit together perfectly.

  • Page 81: Joining The Output Paper Together

    Tip: Regarding the size after joining together: When Borderless Poster Print is cleared and printing with margins is selected, the Print Cutting Guides items are displayed. The finished size is the same whether or not Trim Lines is selected. However, if Overlapping Alignment Marks is selected, the finished size is smaller with an overlap.
  • Page 82 Lay the upper left sheet on top of upper right sheet. Lineup the X marks as shown in the illustration below, and temporarily fasten them using an adhesive tape on the back. While two pages are overlapping, cut them along the alignment mark (vertical red line).

  • Page 83: Printing On Custom Paper

    After joining all of the sheets together, cut the margins along the outer guide lines. Printing Varieties Printing on custom paper You can also print on paper sizes that are not already available in the printer driver. If you create and save a user-defined paper size using the steps below, you can select the saved paper size from Page Setup in the application.
  • Page 84 Making Settings in Windows When the printer driver's Main screen is displayed, click User Defined. “Basic Printing Methods(Windows)” on page 43 Note: You cannot select User Defined if Paper Cassette or Manual Feed is selected as the Source and Borderless is selected as Paper Settings. In the User Defined Paper Size screen, set the paper size you want to use, and then click Save.
  • Page 85 Enter the Width, Height for the Paper Size, and enter the margins, and then click OK. You can set the page size and printer margins depending on the printing method. Page Page Size Settings Sheet Supported media sizes Roll Paper Supported media sizes Roll Paper -...

  • Page 86: Banner Printing (On Roll Paper)

    Banner printing (on roll paper) You can print banners and panoramic pictures if you create and set print data for banner printing in your application. There are two ways to print a banner. Printer Driver Source Supported Applications Roll paper Document preparation software, image editing software, and so on...
  • Page 87 Click Roll Paper Option, and then select Normal Cut or Off from the Auto Cut list. Click User Defined and match the paper size to the size of the data if necessary. Tip: If you are using applications that support banner printing, you do not need to set User Defined Paper Size if you select Roll Paper (Banner) as the Source.
  • Page 88 Making Settings for Mac OS X When the Print screen is displayed, select the size of the data created with the application in Paper Size. When using Mac OS X 10.4, or if items on the Page Setup screen are not displayed on the Print screen due to the application being used in Mac OS X 10.7, 10.6, or 10.5, display the Page Setup screen and make settings.

  • Page 89: Layout Manager(Windows Only)

    Layout Manager (Windows only) The Layout Manager function allows you to place multiple pieces of print data created in different applications on the paper freely and print them at once. You can create a poster or display material by placing multiple pieces of print data where you like.

  • Page 90: Setting Procedures For Printing

    Setting Procedures for Printing Check that the printer is connected and ready to print. Open the file you want to print in your application. In the printer driver's Main screen, select Layout Manager, and select the size of the document made in the application as the Size.

  • Page 91: Saving And Calling Layout Manager Settings

    Saving and Calling Layout Manager Settings You can save the Layout Manager screen arrangement and setting contents to a file. If you need to close your application in the middle of a job, you can save it to a file and then open it later to continue your work.

  • Page 92: Color Management Printing

    Color Management Printing About Color Management Even when using the same image data, the original image and the displayed image may look different, and the printed results may look different to the image you see on the display. This occurs due to the difference in characteristics when input devices such as scanners and digital cameras capture colors as electronic data, and when output devices such as display screens and...

  • Page 93: Setting Profiles

    Setting profiles Settings for the input profile, printer profile, and intent (matching method) vary between three types of color management printing since their color management engines are used differently. This is because color management usage differs between the engines. Make settings in the printer driver or application as described in the following table.

  • Page 94: Setting Color Management With The Printer Driver

    Set color management to off. For Windows In the Main screen, select Custom as the Mode setting, and select Off (No Color Adjustment). Tip: When using Windows 7/Windows Vista/Windows XP (Service Pack 2 or later and .NET 3.0), Off (No Color Adjustment) is automatically selected.

  • Page 95: Color Management Printing By Colorsync (Mac Os X)

    Advanced. “Basic Printing Methods(Windows)” on page 43 Select Host ICM. When Epson special media is selected from Media Type in the Main screen, the printer profile corresponding to the media type is automatically selected and displayed in the Printer Profile Description box.

  • Page 96: Color Management Printing By Driver Icm(Windows Only)

    Furthermore, in Mac OS X 10.5 select Print Settings from the list, and then select Off (No Color Adjustment) from Color Settings. For Mac OS X 10.4 Disable the color management functions in the application. Depending on the type of the application, make the settings following the table below.
  • Page 97 ❏ Driver ICM (Basic) Specify one type of profile and intent for processing the entire image data. ❏ Driver ICM (Advanced) The printer driver distinguishes the image data into the Image, Graphics, and Text areas. Specify three types of profiles and intents for processing each area.
  • Page 98 Intent Explanation Perceptual Converts the data so that a more visually natural image is produced. This feature is used when a wider gamut of color is used for image data. Relative Converts the data so that a set Colorimetric of color gamut and white point (or color temperature) coordinates in the original data match their corresponding...

  • Page 99: Using The Control Panel Menu

    Primarily, the following two menus can be set from the control panel. ❏ Menu You can display or print environmental settings such as custom paper settings when using non-Epson special media, and the printer status. Normally, perform settings for printing in the printer driver or application.
  • Page 100 Epson Stylus Pro 4900/4910 User's Guide Using the Control Panel Menu The following section explains using the Menu as an example.

  • Page 101: Menu List

    Menu List The following items and parameters can be set and executed in the Menu. See the reference pages for more details on each item. Menu Item Printer Setup Platen Gap “Printer Setup menu” Page Line on page 103 Roll Paper Margin Paper Size Check Paper Skew Check Refresh Margin...
  • Page 102 Menu Item Paper Setup Roll Paper Remaining “Paper Setup menu” Cut Sheet Remaining on page 106 Paper Type Custom Paper Head Alignment Paper Thickness “Head Alignment Alignment menu” on page 110 Network Setup Network Settings “Network Setup IP Address Setting menu”...

  • Page 103: Details Of The Menu

    Details of the Menu Printer Setup menu The factory setting is Item Parameter Platen Gap Narrow Standard Wide Wider Widest Page Line Roll Paper Margin Default Top/Bottom 15mm Top 35/Bottom 15mm 15mm Paper Size Check Using the Control Panel Menu Explanation Select the platen gap which is the distance between the print head and the paper.
  • Page 104 Item Parameter Paper Skew Check Refresh Margin Auto Nozzle Check On:Periodically On:Every Job Print Nozzle Pattern On:Every Page On:Every 10 Pages Change Black Ink Manual Auto Using the Control Panel Menu Explanation This setting is effective for roll paper only. Select whether to display (On) or not to display (Off) an error message on the control panel's screen and whether or not stop printing if the paper is not straight.

  • Page 105: Test Print Menu

    Using the Control Panel Menu Explanation When using the Epson special media UltraSmooth Fine Art Paper you must set this to Off before loading the paper. If set to On for UltraSmooth Fine Art Paper, the roller of the paper presser may leave a mark on the surface of the paper.

  • Page 106: Printer Status Menu

    Printer Status menu You can check the printer's current status as displayed on the screen. Item Display Version xxxxxxx,x.xx,xxxx Ink Level (Ink color) [E ********** F] Maintenance Box 1 [E ********** F] 2 [E ********** F] Job History No. 0 to No. 9 Ink xx.x ml Paper xxxxxx cm2 Total Prints...
  • Page 107 Item Parameter Roll Paper Remaining Remaining Paper Setup Roll Paper 15 to 300 ft (5.0 to 99.5 m) Length Roll Length 4 to 50 ft (1 to 15 m) Alert Cut Sheet Sheet 10 to 990 Remaining Number Sheet 1 to 50 Number Alert Paper Type...

  • Page 108: Custom Paper

    Custom Paper settings. ❏ Setting with EPSON LFP Remote Panel 2 EPSON LFP Remote Panel 2 is a utility for performing various maintenance procedures for the printer. You can find it on the Software Disc supplied with this printer. By using EPSON LFP Remote Panel 2, you can easily save Custom Paper settings in the printer's memory.
  • Page 109 Item Parameter Paper Type Photo Paper Proofing Paper Fine Art Paper Matte Paper Plain Paper Platen Gap Narrow Standard Wide Wider Widest Thickness Pattern Print Paper Feed Adjust A Pattern Value Using the Control Panel Menu Explanation You can select the media type that is the closest to the paper you are using.

  • Page 110: Head Alignment Menu

    You can set the thickness of the paper being used. When using Epson special media, select from Paper Type. If you use non-Epson special media, set the Paper Thickness within a range of 4 to 60 mil (0.1 to 1.5 mm).

  • Page 111: Network Setup Menu

    Network Setup menu You can make settings for the network connection. After setting the items, press the l button to return to the previous screen, and then the network is reset and a network connection is available after 40 seconds. This setting is not displayed while resetting.

  • Page 112: Ink Menu Table

    Ink Menu Table The settings and executable actions that can be performed on the Ink Menu are as follows. Executing Cancel closes the Ink Menu. See the following for more details on head cleaning and nozzle check. “Adjusting the Print Head” on page 113 Item Parameter Auto Cleaning...

  • Page 113: Maintenance

    Maintenance Adjusting the Print Head You need to adjust the print head if white lines appear in your print outs or if you notice the print quality has declined. You can perform the following printer maintenance functions for maintaining the print head in good condition to ensure the best print quality.
  • Page 114 Explanations in this section use the Windows printer driver as an example. Use Epson Printer Utility 4 for Mac OS X. “Epson Printer Utility 4 Functions” on page 58 Make sure that the roll paper or a cut sheet of A4 size or larger is loaded in the printer.

  • Page 115: Cleaning The Print Head

    If The following nozzle(s) are clogged. is displayed, press the [ button to start Auto Cleaning. Press the Z button to close the Ink Menu. When the Ink Menu is closed, the message informing you which nozzle(s) are clogged is removed.

  • Page 116: Cleaning Method

    From the computer Explanations in this section use the Windows printer driver as an example. Use Epson Printer Utility 4 for Mac OS X. “Using Epson Printer Utility 4” on page 58 Click Head Cleaning from the Utility tab in the printer driver's Properties (or Print Settings) screen.

  • Page 117: Correcting Print Misalignment (Print Head Alignment)

    Explanations in this section use the Windows printer driver as an example. Use Epson Printer Utility 4 for Mac OS X. “Using Epson Printer Utility 4” on page 58 Make sure that the roll paper or a cut sheet of A4 size or larger is loaded in the printer.
  • Page 118 Alignment, and then press the r button. Press the d/u buttons to select Paper Thickness, and then press the r button. Set the Paper Type for Epson special media, and set the Paper Thickness for non-Epson media. Epson special media (1) Press the d/u buttons to select Paper Type, and then press the r button.
  • Page 119 Aligning the print head automatically When the Menu is displayed, select Head Alignment - Alignment, and then press the r button. Press the d/u buttons to select Auto, and then press the r button. Press the d/u buttons to select the type of alignment pattern, and then press the r button.

  • Page 120: Replacing Consumables

    Epson recommends the use of genuine Epson ink cartridges. Epson cannot guarantee the quality or reliability of non-genuine ink. The use of non-genuine ink may cause damage that is not covered by Epson’s warranties, and under certain circumstances, may cause erratic printer behavior. Information about non-genuine ink levels may not be displayed, and use of non-genuine ink is recorded for possible use in service support.

  • Page 121: Replacing Maintenance Box 1 And 2

    Note: Removed ink cartridges may have ink around the ink supply port, so be careful not to get any ink on the surrounding area when removing the cartridges. Remove the ink cartridge from the bag. Shake the ink cartridge for 5 seconds 15 times horizontally in approximately 5 cm movements as shown in the illustration.

  • Page 122: Replacing Maintenance Box

    Open the right-hand side cartridge cover. Press the groove in the cartridge cover to open the cover. Pull Maintenance Box 1 out. Lifting Maintenance Box 1 up releases the lock, and you can simply pull it straight out. Place the used Maintenance Box 1 in the clear bag included with your new Maintenance Box 1, and make sure that the zipper is closed tight.
  • Page 123 Remove the output tray. Lift the edge of the output tray slightly to remove it. Also remove the optional SpectroProofer if installed. Release the Maintenance Box 2 lock. Pull Maintenance Box 2 out carefully so that it does not tilt. Caution: If ink should spill out onto your skin or into your eyes, wash the affected area with water...

  • Page 124: Replacing The Cutter

    Set the lock. Attach the output tray. Return optional SpectroProofer if it was installed. Replacing the Cutter Replace the cutter when it is not cutting paper cleanly. Supported cutter “Options and Consumable Products” on page 151 Use a cross-head screwdriver to replace the cutter. Make sure you have a cross-head screwdriver with you before replacing the cutter.
  • Page 125 Remove when the optional SpectroProofer is installed. Open the cutter cover. Pull the cover towards you while holding down the lock as shown in the figure to open the cover. Remove the old cutter from the printer. Loosen the screw holding the cutter in place using a cross-head screwdriver and pull the cutter straight out.
  • Page 126 Close the cover. Push in the cover until you hear the upper portion click into place. Return the front cover. Re-insert the four screws that hold the cover in place and use a cross-head screwdriver to tighten them down. The shape of the screws differ for the top and the front.

  • Page 127: Cleaning The Printer

    Cleaning the Printer To keep your printer in optimum operating condition, clean it regularly (about once a month). Cleaning the outside Remove any paper from the printer. Make sure the printer is turned off and the screen has turned off, and then unplug the power cable from the electrical outlet.
  • Page 128 Open the printer cover and use a soft, clean cloth to carefully clean away any dust or dirt inside the printer. Wipe the pink part shown in the following illustration. To avoid spreading the dirt, wipe from the inside to the outside. If there is a serious dirt problem, clean it using a soft, clean cloth dampened with a mild detergent.

  • Page 129: Problem Solver

    Problem Solver When an Error Message is Displayed If an error should occur with the printer (it is not working properly), the alert lamp and/or control panel light will light up and a message is displayed on the screen informing you of the problem. The messages displayed are described in the following section.
  • Page 130 Then try updating the firmware again using EPSON LFP Remote Panel 2. Restart the printer. If this message appears on the screen again, contact your dealer or Epson Support. Ink Cartridge Alert Select Decline to replace the ink cartridge with a genuine Epson ink cartridge. Selecting Non-genuine cartridge! Accept may void EPSON's warranty.
  • Page 131 Error messages What to do Ink Cartridge Alert Replace the ink cartridge with a genuine Epson ink cartridge that can be used with this Please use genuine Epson ink printer. cartridges. ❏ Ink Cartridge Alert Replace ink cartridge(s). ❏ Ink Cartridge Error Remove the ink cartridge, and install an ink cartridge that can be used with this printer.
  • Page 132 Error messages What to do No Front Cover Turn off the printer, then install the front cover. Reinstall the device correctly and then turn Attach front cover then restart on the printer. Installing the front cover U printer. No Ink Cartridges Install ink cartridges.
  • Page 133 Error messages What to do Paper Jam Refer to the "Roll paper jam", "Cut sheets from the paper cassette have jammed while Remove paper from printer. printing", or "Cut sheets from the front/rear manual feeder have jammed" sections on the Power off and then on.
  • Page 134 Perform head cleaning. U “Cleaning method” on page 116 “Loading roll paper” on page 29 “Epson Special Media Table” on page 153 “Loading Cut Sheets” on page 34 The smallest paper width that can be used in the printer is 8 inches.
  • Page 135 Error messages What to do Paper Source Error Press the Z button to clear the message, and then remove the roll paper from the printer Roll paper is loaded. and change the source in the Paper Type menu. When Auto Roll Feeding is set to Off from Remove it and change paper source the Menu, you cannot change the paper type when roll paper is fed.
  • Page 136 U SpectroProofer Mounter 17" User's Guide (PDF) U SpectroProofer Mounter 17" Setup Guide (Sheet) If this message appears on the screen again, contact your dealer or Epson Support. If error number 02 is displayed Turn off the printer, and then remove the SpectroProofer mounter. Remove the SpectroProofer paper guide unit, and then reinstall it correctly.

  • Page 137: When A Maintenance Call/Service Call Occurs

    AC inlet on the printer, and then reconnect. Turn on the printer again multiple times. If the same call for service is displayed on the screen, contact your dealer or Epson Support for assistance. Tell them the call for service code is "XXXX".

  • Page 138: Troubleshooting

    Troubleshooting You cannot print (because the printer does not work) Symptom The printer does not turn on. The printer turns off automatically. The printer driver is not installed properly (Windows). The printer driver is not installed properly (Mac OS X). Problem Solver What to do Is the power cable plugged into the electrical outlet or the printer?
  • Page 139 Symptom What to do The printer is not communicating Is the cable plugged in properly? with the computer. Make sure the printer's interface cable is securely plugged into the correct terminal of the computer and the printer. Also, make sure the cable is not broken nor bent. If you have a spare cable, try connecting with the spare cable.
  • Page 140 ❏ The "Driver Version" shown on the test page is the version number of the Windows internal driver. This differs from the Epson printer driver version that you installed. Problem Solver If the test page is printed correctly, the connection between the printer and computer is correct.

  • Page 141: The Printer Sounds Like It Is Printing, But Nothing Prints

    The printer sounds like it is printing, but nothing prints Symptom The print head moves, but nothing prints. The nozzle check pattern is not printed correctly. Problem Solver What to do Confirm the printer operation Print a nozzle check pattern. Because a nozzle check pattern can be printed without connecting to a computer, you can check the operations and print status for the printer.

  • Page 142: The Prints Are Not What You Expected

    “Correcting Print Misalignment (Print Head Alignment)” on page 117 Are you using a genuine Epson ink cartridge? This printer is developed for use with Epson ink cartridges. If you use non-Epson ink cartridges, the prints may smear, or the color of the printed image may be changed because the remaining ink level is not correctly detected.
  • Page 143 Symptom What to do The color is not exactly the same as Colors vary depending on the printer type due to each printer's characteristics. another printer. Because inks, printer drivers, and printer profiles are developed for each printer model, the colors printed by different printer models are not exactly the same. You can achieve similar colors with the same color adjustment method or the same gamma setting by using the printer driver.
  • Page 144 The paper is creased. Are you using the printer at normal room temperature? Epson special media should be used at normal room temperature (temperature: 15 to 25 ˚C, humidity: 40 to 60 %). For information about paper such as thin paper from other manufacturers that requires special handling, see the manual supplied with the paper.
  • Page 145 Symptom What to do Too much ink is fired. Are the Media Type settings correct? Make sure that the printer driver 's Media Type settings match the paper that you are using. The amount of ink to be fired is controlled according to the media type. If the settings do not match the paper loaded, too much ink may be fired.

  • Page 146: Feeding Or Ejecting Problems

    Is the paper damp? Do not use paper that is damp. Also, Epson special media should be left in the bag until you intend to use it. If it is left out for a long time, the paper curls up and gets damp so that it does not feed properly.
  • Page 147 Symptom What to do Roll paper jam To remove jammed paper, follow the steps below: (1) Open the roll paper cover and cut off the paper at the slot of the roll paper feeder using a cutter sold at a store. (2) Hold both ends of the spindle and lift up from the spindle holder.
  • Page 148 Symptom What to do Cut sheets from the paper cassette To remove jammed paper, follow the steps below: have jammed while printing. (1) Remove the output tray and the paper cassette. (2) Remove the jammed paper from where the cassette was inserted. Cut sheets from the paper cassette (3) If paper is jammed in the rear, remove the rear unit by pulling it towards you with the have jammed while printing.

  • Page 149: Others

    Symptom Cut sheets from the front/rear manual feeder have jammed. Others Symptom Cannot remove the paper cassette. The control panel display keeps turning off. Color ink runs out quickly even when printing in the Black mode or when printing black data. The paper is not cut cleanly.
  • Page 150 The printer status may not be Epson Network Utility may not be installed.(Windows) displayed correctly when using Select Epson Network Utility from the Software List on the Software Disc and install. EPSON Status Monitor 3 or EPSON LFP Remote Panel 2 over a network.

  • Page 151: Appendix

    Appendix Options and Consumable Products The following options and consumable products are available for use with your printer. (As of July, 2010) For the latest information, see the Epson Web site. Name Epson special media Ink cartridges Color Green Light Light...
  • Page 152 Name Product Code 2/3" Dual Roll Feed Spindle C12C811251 Borderless Print Spacer C12C811201 Roll Paper Belt C12C890121 SpectroProofer Mounter 17" C12C890631 Appendix Explanation Same as the spindle supplied with the printer. Same as the Borderless Print Spacer supplied with the printer.

  • Page 153: Supported Media

    Tip: For information about the media types and appropriate settings for printing on paper other than Epson special media or when using raster image processing (RIP) software, see the manual supplied with the paper, or contact the dealer of the paper or the manufacturer of the RIP.

  • Page 154: Cut Sheet

    0.20 mm 3" ✓ 0.46 mm 3" ✓ 0.37 mm 3" Black ICC Profile Epson Stylus Pro 4900_4910 PremiumSemimattePhotoPaper 260.icc Epson Stylus Pro 4900_4910 PhotoPaperGloss250.icc Epson Stylus Pro 4900_4910 PremiumGlossyPhotoPaper170. Epson Stylus Pro 4900_4910 PremiumSemiglossPhotoPaper 170.icc Epson Stylus Pro 4900_4910 EnhancedMattePaper_MK.icc...
  • Page 155 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ PK: Photo Black/MK: Matte Black Black ICC Profile Epson Stylus Pro 4900_4910 PremiumGlossyPhot oPaper.icc Epson Stylus Pro 4900_4910 PremiumSemiglossP hotoPaper.icc Epson Stylus Pro 4900_4910 PremiumLusterPhot oPaper.icc...
  • Page 156 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ Black ICC Profile Epson Stylus Pro 4900_4910 ArchivalMattePaper_ MK.icc/ Epson Stylus Pro 4900_4910 EnhancedMattePape r_MK.icc Epson Stylus Pro 4900_4910 PhotoQualityInkJetP aper.icc Epson Stylus Pro 4900_4910 EpsonProofingPaper WhiteSemimatte.icc...
  • Page 157 * You can specify and perform borderless printing; however, margins may appear or the print quality may decline due to the paper expanding or contracting. Appendix Border Cassette less ✓ 0.48 mm ✓ Black Capacity ICC Profile Epson Stylus Pro 4900_4910 VelvetFineArtPaper_ PK.icc/ PK/MK Epson Stylus Pro 4900_4910 VelvetFineArtPaper_ MK.icc...

  • Page 158: Usable Commercially Available Paper Size

    Epson cannot guarantee the print quality. ❏ Although other paper types manufactured by other companies can be loaded in the printer as long as they meet the following specifications, Epson cannot guarantee the paper feeding and print quality. Roll paper Media types...

  • Page 159: Maintenance Mode

    ❏ Setting with Custom Paper in the Menu, or from EPSON LFP Remote Panel 2 and saving to this printer “Paper Setup menu” on page 106 ❏ Setting with the printer driver and saving to your computer Windows: Set Custom Settings items in the Main screen and then save.

  • Page 160: Maintenance Mode List

    Maintenance Mode List The factory setting is Item Parameter Language Japanese English French Italian German Portuguese Spanish Dutch Korean Chinese Length Units Metric Feet/Inch Temperature Units ˚C Auto Cleaning Times Maintenance Alert Disable Maintenance Box Ink Or Maint Box Papers Appendix Explanation Select the language used on the control panel's screen.
  • Page 161 Item Parameter Cut Sheet Remaining Sleep Mode 5 minutes 15 minutes 60 minutes 120 minutes 180 minutes Power Power Off Timer Management Time To Off Default Panel Execute Custom 0 to 255 About Power Management You can adjust the time before Power Management is applied. Any increase will affect the printer's energy efficiency.

  • Page 162: Notes When Moving Or Transporting The Printer

    Notes When Moving or Transporting the Printer Perform the following operations when moving or transporting the printer. As shown below, always lift the printer by placing your hands in the indentations on the left and right sides. Note: ❏ Only hold the required area; otherwise, the printer may be damaged.

  • Page 163: System Requirements

    System Requirements The following system requirements are necessary to install and use the software for this printer. Windows Operating system Windows XP/Windows XP x64 Windows Vista Windows 7 Pentium® 4 2.0 GHz or higher Memory 1 GB or more Available hard disk 32 GB or more space Interface...

  • Page 164: Standards And Approvals

    Printer Specifications (W) 863 x (D) 766 x (H) 405 mm External size Weight Approx. 52kg (without ink cartridges) * When the paper cassette and output tray are stored Ink Specifications Type Special ink cartridges Pigment ink Black: Photo Black, Matte Black, Light Black, Light Light Black Color: Green, Yellow, Orange, Cyan, Light Cyan, Vivid Magenta, Vivid...

  • Page 165: Where To Get Help

    Where To Get Help Contacting Epson Support Before Contacting Epson If your Epson product is not operating properly and you cannot solve the problem using the troubleshooting information in your product documentation, contact Epson support services for assistance. If Epson support for your area is not listed below, contact the dealer where you purchased your product.

  • Page 166: Help For Users In North America

    (Canada), 6 am to 6 pm, Pacific Time, Monday through Friday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Before you call Epson for support, please have the following information ready: ❏ Product name ❏...

  • Page 167: Help For Users In Australia

    Pingtung City, Pingtung County 900, Taiwan Help for Users in Australia Epson Australia wishes to provide you with a high level of customer service. In addition to your product documentation, we provide the following sources for obtaining information: Your Dealer Don’t forget that your dealer can often help identify and...

  • Page 168: Help For Users In Thailand

    ❏ Sales enquiries and product information ❏ Product usage questions or problems ❏ Enquiries on repair service and warranty Help for Users in Vietnam Contacts for information, support, and services are: Epson Hotline (Phone): 84-8-823-9239 Service Center: 80 Truong Dinh Street, District 1, Hochiminh City...

  • Page 169: Help For Users In Hong Kong

    Epson Hong Kong Limited. Internet Home Page Epson Hong Kong has established a local home page in both Chinese and English on the Internet to provide users with the following information: ❏ Product information ❏...

  • Page 170: Help For Users In The Philippines

    - 6PM) Prefix local STD code Help for Users in the Philippines To obtain technical support as well as other after sales services, users are welcome to contact the Epson Philippines Corporation at the telephone and fax numbers and e-mail address below:...

  • Page 171: Software License Terms

    Epson Stylus Pro 4900/4910 User's Guide Software License Terms Software License Terms Open Source Software Licenses Bonjour This printer product includes the open source software programs which apply the Apple Public Source License Version1.2 or its latest version ("Bonjour Programs").
  • Page 172 Epson Stylus Pro 4900/4910 User's Guide Software License Terms 1.6 "Modifications" mean any addition to, deletion from, and/or change to, the substance and/or structure of the Original Code, any previous Modifications, the combination of Original Code and any previous Modifications, and/ or any respective portions thereof.
  • Page 173 Epson Stylus Pro 4900/4910 User's Guide Software License Terms 2.3 Distribution of Executable Versions. In addition, if You Externally Deploy Covered Code (Original Code and/or Modifications) in object code, executable form only, You must include a prominent notice, in the code itself as well as in related documentation, stating that Source Code of the Covered Code is available under the terms of this License with information on how and where to obtain such Source Code.
  • Page 174 Epson Stylus Pro 4900/4910 User's Guide Software License Terms 8. NO WARRANTY OR SUPPORT. The Covered Code may contain in whole or in part pre-release, untested, or not fully tested works. The Covered Code may contain errors that could cause failures or loss of data, and may be incomplete or contain inaccuracies.
  • Page 175 Epson Stylus Pro 4900/4910 User's Guide Software License Terms (c) automatically without notice from Apple if You, at any time during the term of this License, commence an action for patent infringement against Apple; provided that Apple did not first commence an action for patent infringement against You in that instance.

  • Page 176: Other Software Licenses

    EXHIBIT A. "Portions Copyright (c) 1999-2003 Apple Computer, Inc. All Rights Reserved. This file contains Original Code and/or Modifications of Original Code as defined in and that are subject to the Apple Public Source License Version 2.0 (the 'License'). You may not use this file except in compliance with the License. Please obtain a copy of the License at http://www.opensource.apple.com/apsl/ and read it before using this file.
  • Page 177 Altered versions--including, but not limited to, ports to new operating systems, existing ports with new graphical interfaces, versions with modified or added functionality, and dynamic, shared, or static library versions not from Info-ZIP--must be plainly marked as such and must not be misrepresented as being the original source or, if binaries, compiled from the original source.

This manual is also suitable for:

Stylus pro 4910

Table of Contents