Epson Stylus Pro 4900/Epson Stylus Pro 4910
When installing the upper front cover, be careful of the following.
First attach the cover into the cut on the right of the main
frame, then reassemble the cover in the reverse order of the
disassembling procedure.
Upper front cover
Make sure to insert the ribs on the upper front cover into the
holes on the Media Eject Cover.
Media Eject Cover
11. Disengage the three hooks that secure the Sensor Cover, and remove the Sensor
Cover.
When installing the Sensor Cover, be sure to set the positioning
holes of the sensor cover to the bosses of the sensor holder.
DISASSEMBLY & ASSEMBLY
Cut
Upper front cover
Ribs
Disassembly and Assembly Procedure
Boss
Figure 3-31. Removing the Sensor Cover
12. Disengage the hooks that secure the Printer Cover Sensor, and remove the Printer
Cover Sensor.
13. Disconnect the connector from the Printer Cover Sensor.
Printer Cover Sensor
Figure 3-32. Removing the Printer Cover Sensor
Revision A
Sensor Cover
Boss
Hooks
Connector
Hooks
Confidential
135