Wiper; Removing The Wiper - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.9.4 Wiper

1. Perform " Wiper and Cap Cleaning & Exchange" (Page
to the position to replace it.
2. Remove the Right Upper Cover.
When removing the Wiper in the following steps, remove it with the
C A U T I O N
white mounter.
Wiper
3. Release the hook by lifting the tab with tweezers, and remove the Wiper.
When attaching the Wiper, set it while making it stand up and
press it until it clicks to secure it correctly.
Wiper
DISASSEMBLY & ASSEMBLY
356), and move the Wiper
(p138)
White mounter
Disassembly and Assembly Procedure
Figure 3-171. Removing the Wiper
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or cleaning the Wiper.
<Adjustment items>
1. Wiper and Cap Cleaning & Exchange
2. Counter Reset
(Wiper Counter (for Exchange) or Wiper Counter (for
Cleaning))
Revision A
Tab
Wiper
(see p277) and perform
236
Confidential