Backing/White Calibration Tile Holder; Removing The Backing/White Calibration Tile Holder - Epson Stylus Pro 4910 Service Manual

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.10.2 Backing/White calibration tile holder

1. Remove the Mounter. (p132)
When removing the Backing, be careful not to drop it.
C A U T I O N
2. Remove the Backing and the white calibration tile holder.
Backing
Figure 3-195. Removing the Backing/white calibration tile holder
DISASSEMBLY & ASSEMBLY
White calibration tile holder
Disassembly and Assembly Procedure
Revision A
256
Confidential