Pf Belt; Removing The Pf Belt - Epson Stylus Pro 4910 Service Manual

Large format color inkjet printers
Hide thumbs Also See for Stylus Pro 4910:
Table of Contents

Advertisement

Epson Stylus Pro 4900/Epson Stylus Pro 4910

3.4.5.4 PF Belt

1.
Remove the Front Cover.
(p142)
2.
Remove the Left Cover.
(p137)
3.
Mark the screw positions.
Securing the PF Motor at the marked position makes the
subsequent tension adjustment easier.
4.
Loosen the two screws that secure the PF Motor.
A) Silver, Phillips, Round Washer Head S-tite M3x5: two pieces
5.
Detach the belt from the pinion gear of the PF Motor.
6.
Remove the FFC from the PF Encoder, and release the FFC from the harness
guides of the PF encoder holder.
In the next steps, be careful not to damage the PF Scale.
C A U T I O N
7.
Remove the retaining ring, and remove the gear in the direction of the arrow.
8.
Remove the PF Belt.
Be sure to refer to Chapter 4 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustment after replacing or removing the PF Belt.
<Adjustment item>
PF Belt Adjustment
DISASSEMBLY & ASSEMBLY
(see p277)
and perform
Disassembly and Assembly Procedure
Marking
- Left side -
PF Belt
Harness guides
FFC
A
Pinion gear
PF encoder holder
Figure 3-98. Removing the PF Belt
Revision A
Gear
Retaining ring
PF Scale
185
Confidential

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus pro 4900

Table of Contents