External Anti-Interference Gain - Delta ASD-B2-0121-B User Manual

P2 - 24 DPH1
Default: 0
Applicable Control Mode: ALL
Unit: dB
Range: 0 ~ 32
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to set magnitude of the resonance suppression that is set
by parameter P2-23. If P2-24 is set to 0, the parameters P2-23 and P2-24 are both
disabled.
The parameters P2-23 and P2-24 are the first group of notch filter parameters and
the parameters P2-43 and P2-44 are the second group of notch filter parameters.
P2 - 25 NLP
Default: 2 (1kW and below models) or
Applicable Control Mode: ALL
Unit: 0.1 msec
Range: 0 ~ 1000
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to set low-pass filter time constant of resonance
suppression.
If P2-25 is set to 0, this parameter is disabled.
P2 - 26 DST
Default: 0
Applicable Control Mode: ALL
Unit: 0.001
Range: 0 ~ 1023
Data Size: 16-bit
Display Format: Decimal
Settings:
If P2-26 is set to 0, this parameter is disabled.
Revision June 2010
Notch Filter Attenuation Rate 1
(Resonance Suppression)
Low-pass Filter Time Constant
(Resonance Suppression)
5 (other models)

External Anti-Interference Gain

Chapter 7 Servo Parameters
Address: 0230H, 0231H
Related Section:
Section 6.3.7
Address: 0232H, 0233H
Related Section:
Section 6.3.7
Address: 0234H, 0235H
Related Section: N/A
7-51