Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02. The selected
drive status will be displayed by P0-09.
For example:
Set P0-17 to 7, then all consequent reads of P0-09 will return the motor rotation
speed in r/min.
P0 - 18
CM2A
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 18
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02.
P0 - 19
CM3A
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 18
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02.
P0 - 20
CM4A
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 18
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02.
Revision June 2010
Status Monitor Selection 2
Status Monitor Selection 3
Status Monitor Selection 4
Chapter 7 Servo Parameters
Address: 0024H, 0025H
Related Section: N/A
Address: 0026H, 0027H
Related Section: N/A
Address: 0028H, 0029H
Related Section: N/A
7-17