Status Monitor 4 - Delta ASD-B2-0121-B User Manual

Chapter 7 Servo Parameters
P0 - 12★ CM4
Default: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: N/A
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to provide the value of one of the status monitoring
functions found in P0-02. The value of P0-12 is determined by P0-20 (desired drive
status) through communication setting or the keypad. The drive status can be read
from the communication address of this parameter via communication port.
When reading the drive status through the keypad, if P0-02 is set to 26, VAR-4 will
quickly show for about two seconds and then the value of P0-12 will display on the
display.
P0 - 13★ CM5
Default: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: N/A
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to provide the value of one of the status monitoring
functions found in P0-02. The value of P0-12 is determined by P0-20 (desired drive
status) through communication setting or the keypad. The drive status can be read
from the communication address of this parameter via communication port.
P0 - 14 Reserved (Do Not Use)
P0 - 15 Reserved (Do Not Use)
P0 - 16 Reserved (Do Not Use)
P0 - 17 CM1A
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 18
7-16

Status Monitor 4

Status Monitor 5
Status Monitor Selection 1
Address: 0018H, 0019H
Related Section:
Section 4.3.5
Address: 001AH, 001BH
Related Section:
Section 4.3.5
Address: 0022H, 0023H
Related Section: N/A
Revision June 2010