Servo Startup Time; Status Monitor 1 - Delta ASD-B2-0121-B User Manual

Chapter 7 Servo Parameters
5: V_BUS voltage (+/-8Volts / 450V)
6: Reserved
7: Reserved
Please note: For the setting of analog output voltage proportion, refer to the P1-04
and P1-05.
Example:
P0-03 = 01(CH1 is speed analog output)
Motor speed = (Max. motor speed × V1/8) × P1-04/100, when the output voltage
value of CH1 is V1.
P0 - 04■
Reserved (Do Not Use)
P0 - 05■
Reserved (Do Not Use)
P0 - 06■
Reserved (Do Not Use)
P0 - 07■
Reserved (Do Not Use)
P0 - 08★ TSON
Default: 0
Applicable Control Mode: ALL
Unit: Hour
Range: 0 ~ 65535
Data Size: 16-bit
Display Format: Decimal
P0 - 09★ CM1
Default: N/A
Applicable Control Mode: ALL
Unit: N/A
Range: N/A
Data Size: 32-bit
Display Format: Decimal
Settings:
This parameter is used to provide the value of one of the status monitoring
functions found in P0-02. The value of P0-09 is determined by P0-17 (desired drive
status) through communication setting or the keypad. The drive status can be read
from the communication address of this parameter via communication port.
For example:
Set P0-17 to 3, then all consequent reads of P0-09 will return the motor feedback
7-14

Servo Startup Time

Status Monitor 1

Address: 0010H, 0011H
Related Section: N/A
Address: 0012H, 0013H
Related Section:
Section 4.3.5
Revision June 2010