Status Monitor Register; Status Monitor Register Selection - Delta ASD-B2-0121-B User Manual

Chapter 7 Servo Parameters
P0 - 21 CM5A
Default: 0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 18
Data Size: 16-bit
Display Format: Decimal
Settings:
This parameter is used to determine the drive status found in P0-02.
P0 - 22 Reserved (Do Not Use)
P0 - 23 Reserved (Do Not Use)
P0 - 24 Reserved (Do Not Use)
P0 - 44 PCMN
Default: 0x0
Applicable Control Mode: ALL
Unit: N/A
Range: determined by the communication address of the designated parameter
Data Size: 32-bit
Display Format: Decimal
Settings:
The function of this parameter is the same as P0-09 (Please refer to P0-09). Please
note that this pamameter can be set through communication setting only.
P0 - 45■
PCMNA
Default: 0x0
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 127
Data Size: 16-bit
Display Format: Decimal
Settings:
The function of this parameter is the same as P0-17 (Please refer to P0-17). Please
note that this pamameter can be set through communication setting only.
7-18
Status Monitor Selection 5
Status Monitor Register (PC Software
Setting)
Status Monitor Register Selection (PC
Software Setting)
Address: 002AH, 002BH
Related Section: N/A
Address: 0058H, 0059H
Related Section:
Section 4.3.5
Address: 005AH, 005BH
Related Section:
Section 4.3.5
Revision June 2010