Chapter 3 Connections and Wiring
3.6 Standard Connection Example
3-36
Please note:
*1 Please refer to C3 ~ C4 wiring diagrams in
section 3.3.3 (on page 3-24 and 3-25).
*2 Please refer to C3 ~ C4 wiring diagrams in
section 3.3.3 (on page 3-24 and 3-25).
*3 Please refer to C9 ~ C12 wiring diagrams
(SINK / SOURCE mode) in section 3.3.3
(on page 3-27).
*4 400W and below drives do not provide
built-in regenerative resistor.
*5 The coil of brake has no polarity.
Revision June 2010