Stable Inertia Estimating Time - Delta ASD-B2-0121-B User Manual

Chapter 7 Servo Parameters
P2 - 67 JSL
Default: 1.5
Applicable Control Mode: ALL
Unit: 0.1times
Range: 0 ~ 200.0
Data Size: 16-bit
Display Format: Decimal
Settings:
In semi-auto tuning mode, after the servo drive continuously perform the
adjustment for a period of time which is determined by P2-67, the system will
consider that the system inertia has become stable and finish the operation of
system inertia estimation.
7-68

Stable Inertia Estimating Time

Address: 0286H, 0287H
Related Section: N/A
Revision June 2010