Current Detector Drift Adjustment; Igbt Ntc Calibration - Delta ASD-B2-0121-B User Manual

P4 - 17 COF3
Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 32767
Data Size: 16-bit
Display Format: Decimal
Settings:
Refer to P4-11 for explanation.
Please note that when P2-08 is set to 10, the users cannot reset this parameter.
P4 - 18 COF4
Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 0 ~ 32767
Data Size: 16-bit
Display Format: Decimal
Settings:
Refer to P4-11 for explanation.
Please note that when P2-08 is set to 10, the users cannot reset this parameter.
P4 - 19 TIGB
Default: Factory setting
Applicable Control Mode: ALL
Unit: N/A
Range: 1 ~ 3
Data Size: 16-bit
Display Format: Decimal
Settings:
Refer to P4-11 for explanation.
When executing this auto adjustment, please ensure to cool the servo drive to
o
25 C.
Revision June 2010
Current Detector Drift Adjustment (W1
phase)
Current Detector Drift Adjustment (W2
phase)

IGBT NTC Calibration

Chapter 7 Servo Parameters
Address: 0422H, 0423H
Related Section: N/A
Address: 0424H, 0425H
Related Section: N/A
Address: 0426H, 0427H
Related Section: N/A
7-81