Description Of Digital Keypad; Chapter 4 Display And Operation - Delta ASD-B2-0121-B User Manual

This chapter describes the basic operation of the digital keypad and the features it offers.
4.1 Description of the Digital Keypad
The digital keypad includes the display panel and function keys. The Figure 4.1 shows all of
the features of the digital keypad and an overview of their functions.
Figure 4.1
Name
The LCD Display (5-digit, 7-step display panel) shows the monitor codes,
LCD Display
parameter settings and operation values of the AC servo drive.
Charge LED The Charge LED lights to indicate the power is applied to the circuit.
MODE Key. Pressing MODE key can enter or exit different parameter
MODE Key
groups, and switch between Monitor mode and Parameter mode.
SHIFT Key. Pressing SHIFT key can scrolls through parameter groups. After
a parameter is selected and its value displayed, pressing SHIFT key can
SHIFT Key
move the cursor to the left and then change parameter settings (blinking
digits) by using arrow keys.
UP and DOWN arrow Key. Pressing the UP and DOWN arrow key can scroll
UP and DOWN
through and change monitor codes, parameter groups and various
Key
parameter settings.
SET Key. Pressing the SET key can display and save the parameter groups,
the various parameter settings. In monitor mode, pressing SET key can
switch decimal or hexadecimal display. In parameter mode, pressing SET
SET Key
key can enter into parameter setting mode. During diagnosis operation,
pressing SET key can execute the function in the last step. (The parameter
settings changes are not effective until the SET key is pressed.)
Revision June 2010

Chapter 4 Display and Operation

Function
4-1