Partitioning Of The Hard Disk - Siemens SINUMERIK 840Di Manual

15 SW Installation/Update and Data Backup
15.1 General requirements
15.1.2

Partitioning of the hard disk

Partitions
15-456
The PCU hard disk is divided into four partitions (three primary partitions and an
extended partition).
S
For reasons of data security, the SINUMERIK 840Di system software, the
Windows NT system software and the Service software are installed in dif-
ferent partitions.
S
A boot manager is provided so that you can boot the system either with Win-
dows NT (SINUMERIK 840Di user interface) or MS DOS (Service menu).
The diagram below shows the partitioning of the hard disk when the control sys-
tem is supplied:
active
C: D:
FAT16
Name: DOS Name:
Contents: Tools Contents: Images,
Primary partition Extended partition
with logic drive
Fig. 15-1 Partitioning of the hard disk
1st partition/drive C:
Drive C: contains MS DOS 6.2, tools (e.g. Norton Ghostt) and scripts
implemented by the service menu.
2nd partition/drive D:
Drive D: contains:
– The Images directory with the images preinstalled and created by
the user
– The Install directory into which the software to be installed is to be
copied first before the installation process itself is carried out under
Windows NT.
– The Update directory for later installation of Windows NT system
software.
3rd partition/drive E:
Drive E: is reserved for the Windows NT system software.
4th partition/drive F:
Drive F: contains the Windows NT applications, e.g. the SINUMERIK
840Di system software.
Further applications, such as HMI system software, HMI-OEM applica-
tions, SIMATIC Manager S7/M7 or customer-specific applications (e.g.
user interfaces created using Protool/Pro MC), will also be installed here.
E:
FAT16 NTFS
TMP Name: WinNT
Contents: WinNT 4.0
Install,
Updates
Primary partition
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
F:
NTFS
Name: 840D system
Contents: 840Di system
software,
further appl.
Primary partition