Module - Siemens SINUMERIK 840Di Manual

2 Hardware Descriptions
2.2 MCI board
Guide rail
Fig. 2-3 Mounting of the module
2-52
4. Remove the screws from the cover of the housing (Fig. 2-2) and open the
housing of your PC, observing the relevant safety regulations.
Screws of the cover of the housing
Fig. 2-2 Cover of the housing of the PCU 50
5. Optional:
Remove interconnecting cable to the MCI board extension module, interface
X2.
6. Remove the fastening screw of the module holding-down device (Fig. 2-3)
and remove the module holding-down device.
7. Remove the fastening screw of the cover plate of the module.
8. Remove the module, observing the ESD measures.
9. Remove the battery receptacle using an appropriate screw driver
(see Fig. 2-4).
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
Fastening
screws for
the module
holding-down
device

Module

holding-down
device
Plastic
holder