Siemens SINUMERIK 840Di Manual page 170

5 MPI Communication
5.8 External operator panel (PCU with HMI Advanced)
Defining useable
languages
Default setting
without activating
pictographic
languages
Default setting
with pictographic
languages
5-170
In the file c:<installation path>\mmc2\mmc.ini, the languages that can be
used in the MMC are configured. Any modifications to the file described in the
following can be made using the editor provided to the user under Start-up/
MMC.
Two languages can be configured from the languages listed below:
GR German (standard)
SP Spanish
FR French
UK English (standard)
IT Italian
Example:
First language German, second language English
File MMC.INI must be altered as shown below:
Excerpt from mmc.ini:
...
[LANGUAGE]
Language=GR
LanguageFont=Europe
Language2=UK
LanguageFont2=Europe
...
Notice
When editing file MMC.INI, take care to ensure that you change only the high-
lighted (bold print) texts. Make sure that your entries are spelled correctly.
Two languages can be configured from the languages listed below:
GR German (standard)
SP Spanish
FR French
UK English (standard)
IT Italian
TW Chinese (Taiwan) pictographic language
CH Chinese (Mandarin) pictographic language
Example:
First language German, second language Chinese
File MMC.INI must be altered as shown below:
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03