Restoring A Partition Backup (Local) - Siemens SINUMERIK 840Di Manual

06.03

15.3.10 Restoring a partition backup (local)

Brief description
Requirements
Operating actions
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Use the operator actions explained in the following to restore a partition backup
of the partitions C:, E: and F: of the PCU hard disk (partition image).
No special requirements need to be fulfilled.
After the PCU has been turned on, the menu of the boot manager is displayed.
1. Select the menu option Service menu (hidden) using the CursorDown key
and then press the Input key.
The following menu will appear:
PLEASE SELECT
1 Install/Update SINUMERIK System
2 SINUMERIK Tools and Options
3 DOS Shell
4 Start Windows NT (Service Mode)
5 SINUMERIK System Check
7 Backup/Restore
8 Start PC Link
9 Reboot (warm restart)
P 840Di Services
Your Choice [1,2,3,4,5,7,8,9,P] ?
2. Choose Backup/Restore using the key "7".
The system prompts you to enter a password:
3. Type one of the passwords of protection levels 0–2.
– System
– Manufacturer
– Service.
Following menu:
PLEASE SELECT
1 Hard disk Backup/Restore with GHOST
4 Partitions Backup/Restore with GHOST
9 Back to previous Menu
Your Choice [1,4,9]?
4. Choose the menu option Partitions Backup/Restore with Ghost using
key "4".
15 SW Installation/Update and Data Backup
15.3 Data backup
15-497