Siemens SINUMERIK 840Di Manual page 361

06.03
Axis-specific ($MA_ ...)
34220 ENC_ABS_TURNS_MODULO
34300 ENC_REFP_MARKER_DIST[n]
34310 ENC_MARKER_INC[n]
34320 ENC_INVERS[encoder]
34330 REFP_STOP_AT_ABS_MARKER[n]
35150 SPIND_DES_VELO_TOL
36302 ENC_FREQ_LIMIT_LOW
36310 ENC_ZERO_MONITORING
30250 ACT_POS_ABS
References
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
/FB/ Description of Functions, Basic Machine,
R1 Reference Point Approach
10 NC Start-Up with HMI Advanced
Range of absolute encoder with rotary encod-
ers
Reference marker distance with distance-coded
measurements [encoder number]
Interval between two reference marks with dis-
tance-coded measurements[encoder no.]
Linear measuring system inverse to the ma-
chine system [encoder number]
Distance-coded linear measuring system with-
out target point [encoder number]
Spindle speed tolerance
Encoder limit frequency for re-synchronization
Zero mark monitoring
Absolute encoder position on switching off
10.5 Axes and spindles
R2
S1
10-361