Siemens SINUMERIK 840Di Manual page 489

Hide thumbs Also See for SINUMERIK 840Di:
Table of Contents

Advertisement

06.03
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
Connected network drive (last)
Use the key "9" to return to the "Main menu for configuring the Ghost param-
eters" Fig. 15-5 (page 15-488).
S
To set the path or the file name under which you wish the backup copy to be
stored on the external computer, select the menu option Change Backup
Image Filename using the key "4".
– Specify the network drive (in the example: "H") under which the backup
copy will be stored on the external computer.
If necessary you can enter an additional path specification that will be
added to the path specification of the network drive. In this way, you can
restore the backup copy from a subdirectory, with reference to the
shared drive/directory of the external computer.
– Type the desired file name under which you wish to store the backup
copy: e.g. SICHER01.GHO
Use the key "9" to return to the "Main menu for configuring the Ghost param-
eters" Fig. 15-5 (page 15-488).
Use the key "9" to return to the "Main menu for saving/restoring hard disks" after
you have confirmed the confirmation warning regarding the modified GHOST
parameters.
Following menu:
PLEASE SELECT
1
Configure Ghost Parameters
2
Hard disk Backup to H:\<PFAD>\SICHER01.GHO, Mode LOCAL
3
Hard disk Backup from H:\<PATH>\SICHER01.GHO, Mode LOCAL
9
Back to previous Menu
Your Choice [1,2,3,9] ?
6. Choose the menu item Hard disk Backup from... using the key "3".
Following menu:
PLEASE SELECT
1
Windows NT
2
Win95
3
WfW3.11
4
DOS
9
Back to previous Menu
Your Choice [1,2,3,4,9]?
7. Use this menu to choose the operating system used as the basis for the
backup copy. In the case of SINUMERIK 840Di, this is exclusively Windows
NT. Therefore, choose Windows NT using the key "1".
15 SW Installation/Update and Data Backup
H: (\\R3344\MY_BACKUP)
15.3 Data backup
15-489

Advertisement

Table of Contents
loading

Table of Contents