Syntax For Alarm Text Files - Siemens SINUMERIK 840Di Manual

11 Alarm and Message Texts
11.1 Alarm and message texts
11.1.4

Syntax for alarm text files

Alarm numbers
Format of the
text file for
cycle alarm texts
Alarm number
Display
11-406
The following alarm numbers are available for alarms relating to cycles, compile
cycles and the PLC:
Table 11-2 Alarm numbers for cycle, compile cycle and PLC alarms
Number range
60000–60999 Cycle alarms y
(Siemens) (Si
61000–61999
62000–62999
63000–64999 Reserved
65000–65999 Cycle alarms y
( (user) )
66000–66999
67000–67999
68000–69000 Reserved
70000–79999 Compile cycle alarms
400000–499999 PLC alarms, general
500000–599999 PLC alarms for channel
600000–699999 PLC alarms for axis and
spindle
700000–799999 PLC alarms for user
800000–899999 PLC alarms for sequential
controllers/graphs
The text file for cycle and compile cycle alarms has the following structure:
Table 11-3 Structure of text file for cycle alarm texts
Alarm number Display
60100 1
60101 1
... ...
65202 0
// Alarm text file for cycles in German
References: /FB/,
Alarm number list
This number defines the alarm display type:
0: Display in alarm line
1: Display in a dialog box
Designation
Display, NC start disable
)
Display, NC start disable,
axis/spindle standstill
Display
Display, NC start disable
Display, NC start disable,
axis/spindle standstill
Display
Help ID Text or alarm number
0 "No D number %1 programmed"
0 60100
... ...
1 "Axis %2 in channel %1 is still moving"
Description of Functions, Basic Machine
P3
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
Effect Delete
Reset
Reset
Cancel
Reset
Reset
Cancel
Basic PLC Program
Section: Lists