SW Installation/Update and Data Backup
PCU basic software
Scope of basic
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
This section describes installation or updating of software applications and data
backup of the entire hard disk (disk images) or partitions (partition images) of
the PCU on the basis of preinstalled PCU basic software.
All actions described here are started from the Service Menu under MS DOS.
The Service menu is selected from the menu of the Boot Manager that is dis-
played when booting after turning on the PCU.
The PCU basic software that is already preinstalled on the PCU hard disk when
the SINUMERIK 840Di is supplied comprises:
Windows NT 4.0, Service Pack 6, English version
Internet Explorer 5, English version
MS-DOS SW 6.21 and higher
MPI driver SW 5 and higher
Norton Ghostt Version 6 and higher
Norton GhostWalkert Version 6 and higher.
For information on the PCU basic software, please refer to the file
For the versions of the system components contained in the PCU basic soft-
ware, please refer to the file C:\BaseVers.txt.