Siemens SINUMERIK 840Di Manual page 198

Hide thumbs Also See for SINUMERIK 840Di:

Table of Contents

6 Turning On and Ramp Up

6.5 Service menu

Operator action

Select 840Di Services with key "P".

Following menu:

PLEASE SELECT

1 Set PLC-Mode to STOP

2 Set PLC-Mode to RUN

3 Set PLC-Mode to RUNP

9 Return to Main Menu

Your Choice [1,2,3,4,9] ?

After you have selected the function, the system is rebooted. While the PCU is

started up, the following message box is displayed indicating execution of an

840Di Service:

SINUMERIK 840Di NCK/PLC

Alarm: System order executed.

The message box must be acknowledged with "OK".

The selected function is executed after ramp-up of the corresponding SINUM-

ERIK 840Di component.

SINUMERIK 840Di Manual (HBI) – 06.03 Edition