Overview Of Software Components - Siemens SINUMERIK 840Di Manual

1 General on the SINUMERIK 840Di

1.2 Overview of software components

1.2 Overview of software components
SINUMERIK 840Di
System software
Table 1-2 Order numbers for the SINUMERIK 840Di system software
System software
Standard 840Di 6FC5 258-
Basic Basic
Export 840DiE
Standard 840Di 6FC5 258-
Universal Universal
Export 840DiE
Standard 840Di 6FC5 258-
Plus Plus
Export 840DiE
j
6FC5 258-0 . . .-0AF0, current software version on the hard disk
6FC5 258-X . . .-YAF0, specific software version on the hard disk
6FC5 258-0 . . .-0AG2, software maintenance/update service on CD-ROM
6FC5 258-X . . .-YAG3, update when order placed, specific software version, on CD-ROM
specific software version: e.g. 2.1: X = 2, Y = 1
for more detailed information, please refer to: Ordering information Catalog NC 60
n possible
– not possible
Additional soft-
ware components
Basic software
1-32
A range of different system software packages are available for the SINUMERIK
840Di system:
S
Basic system software
maximum of 6 axes
Order No.: see Table 1-2
S
Universal system software
maximum of 10 axes
Order No.: see Table 1-2
S
Plus system software
maximum of 18 axes
Order No.: see Table 1-2
Order No.
j j jj
AX10- A
j j jj
6FC5 258- AY10- A
j j jj
AX20- A
j j jj
6FC5 258- AY20- A
j j jj
AX30- A
j j jj
6FC5 258- AY30- A
The following software components are included in the scope of delivery of the
SINUMERIK 840Di system and are either installed on the PCU hard disk or pro-
vided on CD for installation:
The basic SINUMERIK 840Di software encompasses the following compo-
nents:
– Basic PCU software
– Windows NT 4.0
– Service menu
– PCU-specific drivers
(installed)
– Basic 840Di software
– 840Di start-up
– NCK-specific real-time drivers
PCU hardware
PCU 50 PCU 50 PCU 50
333MHz 500MHz 566MHz
n n n
n n n
n n n
n n n
n n
–
n n
–
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
PCU 50 PCU 70
1.2GHz 500MHz
n n
n n
n n
n n
n n
n n