Siemens SINUMERIK 840Di Manual page 464

15 SW Installation/Update and Data Backup
15.2 Software installation/update
15-464
3. Now, turn on the PCU and choose the menu option "Service menu" (hidden)
from the menu of the boot manager using the CursorDown key and then
press the Input key.
The following menu will appear:
PLEASE SELECT
1 Install/Update SINUMERIK System
2 SINUMERIK Tools and Options
3 DOS Shell
4 Start Windows NT (Service Mode)
5 SINUMERIK System Check
7 Backup/Restore
8 Start PC Link
9 Reboot (warm restart)
P 840Di Services
Your Choice [1,2,3,4,5,7,8,9,P] ?
4. Select Start PC Link using the key "8".
The system prompts you to enter a password:
5. Type one of the passwords of protection levels 0–2.
– System
– Manufacturer
– Service.
The following menu will appear:
Microsoft
This Computer
(Server)
C: <size>
D: <size>
LPT1:
Transfer
6. Now, restart the ext. computer (PG/PC).
7. After the ext. computer (PG/PC) has been booted, the PCU automatically
reestablishes the connection to it.
The following menu will appear:
Microsoft
This Computer
(Server)
C: <size>
D: <size>
LPT1:
Transfer
Interlnk Server Version
Other Computer
(Client)
| Port: Speed: | Alt + F4=Exit
Interlnk Server Version
Other Computer
(Client)
F:
G:
| Port: Speed: | Alt + F4=Exit
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03
<version>
<version>