13 Drive Optimization using HMI Advanced
13.7 File function
Fig. 13-13 Menu: File functions
Use the File functions soft key to call the appropriate screen form.
Here you can save, load and delete the parameters, axis-specific machine data
and measurement results set for the measurements.
The file functions are not intended as a replacement for a complete copy of the
system and user data, e.g. for archiving or series machine start-up, but only for
the simplified and flexible management of the specific measurement data.
In the "File" group, you can select an existing file from the drop-down list or
enter one in the text field underneath.
In the Directory group, you can select the directory where you want to save the
file. This can also be a directory in the Services operating area you have
created by yourself or the basic directory of the data management (list entry:
In the Data group, you can select the data you want to save.
You can only select one data type. Use either the mouse button or the cursor or
toggle key for selection.
Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition